• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat leave and come back whenever they want without having to let them in or out. They also can help stop your cat from urinating inside the house.

It is much easier to put an animal flap on a upvc panel than one made of glass, but you will require some knowledge and appropriate tools.

Measure the Door

The installation of a cat flap inside the door can be a challenge but as long as you use the correct type of cat flap make sure you take your time and follow the directions provided, it shouldn't be too difficult. We will be showing you how to mark out the shape, use the jigsaw to slice the door's opening and then finish the job by fixing the flap to the door. This will ensure that the flap remains in place and also protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap that you need, measure your pet's width. This will let you select a cat flap that is big enough to allow your pet to go into the home and exit without having to open the door every time.

If your kit has an illustration of where to drill then you can place it on the door and then draw around it. If your door has sill or moulding on the bottom edge ensure you have clearance from these to keep your cat safe and prevent them gaining access to your home.

Then put on your eye protection as well as a dust mask, and using a jigsaw, begin to cut along the line that you have pencilled in, but don't press the blade too hard because this could cause it to cut more quickly than you'd like it to. If you have a square that you have cut, use it to check whether you're cutting in the right way and to ensure that the hole is in a rectangle shape, once you are satisfied with this you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great way to let your pet in and out without worrying about them being in the house with a visitor, or leaving unwanted gifts inside the house. It also stops draughts and helps to keep your home's temperature steady. Installing a cat flap fitting flap on your door might seem difficult to those who haven't done it before. Many people call an expert joiner or carpenter to do the work. While this is certainly an option, it is possible to do the work yourself if you have the proper tools and follow instructions carefully.

This is much simpler to accomplish on doors made of wood, however it is still possible with upvc door panel cat flap. However it is important to be cautious not to scratch the doors since this could make it impossible to claim your warranty. First, you need to examine the door's measurements to make sure it will accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However, if your door is made of composite or another kind of door, you may require more care.

The next step is to measure the height of your cat's belly. This is the amount of height between the floor and the underside of your cat's stomach. You'll need to find an area at the entrance that will allow your pet to pass through comfortably. Once you know this then you be required to mark the area with a pencil and a spirit level so that you can ensure that the hole you make will be a good fit for your cat.

After you have marked the area, you're now ready to cut the hole. It is important to be patient and use a jigsaw ensure that the cuts are clean and smooth, not rough and uneven. This could damage your door. Wear safety glasses and a dust mask when working with a jigsaw. Inhaling sawdust is hazardous for your health. After you've cut the hole, you'll need sandpaper to smooth the edges so that the cat flap can be easily inserted into the hole.

Make a hole

The process of fitting a cat flap to an existing door panel or double glazing sealed unit can be quite difficult. You may be tempted to tackle the task yourself, but unless have a lot of experience in DIY it is probably best to get a professional to do the task for you. A botched job could not only be ugly and unattractive, but could also be security risks. It could allow cold air to enter when the cat flap in upvc door panel [visit link] is outside and hot air to escape when it is inside.

Mark the hole's position on the door with the help of a pencil and a spirit level. This will ensure that it is properly positioned and runs flush with the door's other parts. You should make sure you have an sandpaper piece on ready for any rough edges.

Wear any safety equipment you'll need to use the power tool. If you're worried about the noise, you can purchase an electric jigsaw that is quieter and more user-friendly.

It is essential to only remove the material needed for the fitment of the cat flap. A little bit of extra material will be needed to cover the thickness of the the cat flap itself but cutting off more than this can cause problems and even damage the doors frame.

If the door is made of upvc and has a metal panel or frame, Cat Flap In Upvc Door Panel it could interfere with the microchip flap. In this scenario you'll need create an extra-large hole to ensure that the metal does not come into contact with wall of the flap.

If you're installing the cat flap onto a upvc door or double-glazed window with a metal frame then you'll need to talk to a professional who can supply you with a new pane of glass that already has the hole for the cat flap premade inside. This will be less expensive than fitting a cat flap step flap in an existing pane that wasn't designed specifically for this purpose.

Install the Flap

Cat flaps allow your pet the freedom to move around whenever they like, allowing them to relax at home whenever they'd like. If you have a uPVC front door, it may be difficult to put in the cat flap. This is especially true if you do not own an glass panel which can be cut. If you're willing to install a half-glazed uPVC replacement upvc door panel with cat flap panel, it is possible to add a cat flap. It's not as easy as cutting a hole through the door, however there are some things you'll need to do first to ensure that it's safe.

A composite, uPVC or GRP door panel is usually comprised of a plastic skin which is bonded to an insulating polystyrene base. It is essential to be cautious when cutting the material. This kind of door has a template you can use to cut the hole.

After you've marked the position of the hole in your door, it's time to fit the cat flap. You can purchase and install a wide variety of different models including basic push-button operated models to microchip-activated ones that allow access only to your pet. But, regardless of the type of cat flap you select, it's crucial to ensure that your cat is able to use the flap and not get stuck outside in the rain.

A circular fitting is better than a square, because circles can be cut more securely into the glass. This is because square holes can make the glass more susceptible to cracking when drilling is applied to it. This is also a safer choice, as you won't have to drill into the toughened glass which could break and cause harm to your pet or your family members. This is particularly important if you have child or an elderly person living at home who could be injured by shards of glass.