• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Locks

It isn't easy to change your door lock. It is essential to protect your home from burglars. You should also change your locks when you move in with new housemates, or if you rent your house.

The majority of new locks are designed to fit standard door widths. If your door is wider, you'll require a "thick-door" kit with longer screws and longer tail pieces for deadbolts.

The old lock can be removed

It is necessary to remove your old door lock from the door before you install the new lock. This can be accomplished with the use of a few tools, but you need to take care not to damage the door or frame. Using the right tools will save you from costly repairs in the future.

Remove the screws that hold the trim and handle. You can use a screwdriver to do this. Once the screws have been removed, you can take off the trim. Then, you can access the screw that holds the handle and trim to the door. After you have removed the screw, you can remove the lock cylinder as well as open the handle.

If you are unable to move your key inside, this is a sign that the lock is failing. This is because the tumblers wear out and then stopping the movement upwards or downwards, causing the lock to cease to function. You'll need to have the lock rekeyed by a locksmith if this happens.

Start by removing the screws that hold the faceplate to its place. If the kit you purchased does not come with new screws, you can purchase them from the hardware store. If you are installing a mortise lock, you will also need to remove the screws holding the external roseplate to the door. After you've removed the screws pull the dead bolt and the plate away from the door.

Next, search for a hole in the inside trim of the handle. If you find a hole then insert a straightened safety-pin into it. You can also test using a flat screwdriver in the slot or depression. This should open the lock handle and expose screws that can be removed in order to remove the entire lock from the door.

Installing the new lock

Installing a new lock could be done with ease regardless of whether you need to replace your lock after a break-in, or you simply want to change your door's appearance. It is important to measure your door to ensure that you buy a new lock that is the proper size for your door. This is particularly crucial for deadbolt locks, which have to be of a certain size to fit inside the strike pocket and bolt plate. If you're unsure of how to measure, you can ask for assistance at your local hardware store or locksmith.

If you are replacing a mortice, use the existing centrerail as a guide to place the new mortise. After you've marked the location of the lock, drill holes along the centre line which are the same width of the lock. Then, you can chisel your wood until you've got an even rectangular space that will accommodate your mortice lock. Place the lock in and then outline the faceplate with the marking blade. Mark and drill screw holes to secure the faceplate into the correct position.

You can save money when changing locks by purchasing an entry-level set that comes with an re-keyable key as well as a blank key. These kits are available from numerous online retailers as well as home improvement and hardware stores. The kits also come with instructions to assist you in completing your task.

Review your lease agreement if you are renting before changing locks. It could require you to give the landlord a key to the new lock. If so, you might be required to take out the old lock and replace it with a new lock. You can purchase a basic lock at your local hardware retailer, or get a high-tech smart lock that connects to your home's Wi-Fi and lets you lock and unlock your door remotely. An ideal choice is a Schlage Smart Lock, which can be used with a variety of door levers and knobs. It can also be linked to your home security hub that is smart and will send notifications when your door is opened or locked.

Installing a new lock

A broken lock can be a security threat, so it is important to replace it as soon as possible. It's simple to replace upvc windows locks repair for doors. The first step is to disengage the old lock from the door. The screws holding the lock in place are removed and the lock is pulled out. Depending on the type you are using, you might require an Allen wrench or screwdriver. Save all the components of the old lock and store them in a safe place.

Install the new lock on the door. The majority of kits come with a cardboard template of how the lock should fit on the door. If the template doesn't fit your door, draw a line with a pencil around it or a Chisel to remove extra material. Be sure that the inside latch plate is aligned with the mortise opening once the new lock is installed.

When you install the new lock, be cautious not to over tighten it. This could cause the lock to rattle or even break. If you have a lock that is keyed, make sure the spindle is in alignment with the hole on the knob. If it isn't you can use a screwdriver to push the spindle into the lock and into the knob.

After you have completed installing the new lock, you can now put in the decorative base plate that comes with it. If the lock doesn't include base plates then you can purchase one that matches your hardware.

The last step is to test the new lock to ensure it works. You can do this by inserting the key into the lock and turning it so that it opens. If this doesn't work you need to seek out a locksmith.

Rekeying your locks with a professional can also help prevent break-ins. This involves changing the internal tumblers of your lock to make it insensitive to the keys you have previously used. This will make you feel safe and secure in your home.

Test the new lock

If you're installing a new lock, you must ensure that it functions as you intended. This is why it's crucial to follow the guidelines carefully. You might not be able to open your door if don't. If you're not sure of what to do, you can call a professional locksmith for assistance. A locksmith can also give guidance on the best locks for your home.

If you are having trouble opening your lock it could be a problem with the handle or latch. It is possible to lubricate the latch with graphite or spray it with WD-40. In some instances, this will fix the issue. It may be necessary to replace the latch if the latch isn't working correctly.

Another possibility is that the lock has been installed incorrectly. The inner door handle clip may be damaged or missing from the new lock. In this instance, you should grab the handle from inside and insert a plastic retainer clip. The handle is then connected to the lock, and the lock tested.

It is important to test the keypad after you've replaced your lock to make sure it functions properly. You can test the keypad by inserting it into the lock and turning it. If the keypad functions properly, your door should be able to unlock and lock.

You should also check the deadbolt upvc window lock repair near me repair window lock replacement window lock lock (you can find out more) to see whether it's operating properly. If it's not working properly, remove the latch from the door and undo the Phillips-head screws. Remove the old deadbolt and replace it with a new one. Place the deadbolt in the proper direction and load the lock correctly.

Spindle testing is another way to test a new lock. This can be accomplished by inserting a screwdriver in the spindle. This test should always be carried out prior to reinstalling a lock to avoid any mistakes.