• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to enter and go from the house at their own pace is a good idea to keep it physically and mentally active. A flap can help reduce toileting incidents by making it easier for your cat to leave the home when necessary.

Take a look at the Door

A cat flap lets your pet come and go whenever they want without you having to open the door. This is a great method to keep your pet inside the house when you are away or at home. It also helps to keep unwanted pests from getting into your.

It is essential to examine the door's measurements to ensure that you have the correct size cat flap. There are many sizes available. This ensures that you get the correct size that fits into your door made of upvc otherwise, it could be too small or large, and your cat may struggle to use it.

Take fitting a cat flap ruler, and measure the width at several points along the edge of the door. Also, you should measure the door's height in a few places. This is because doors that are too high will cause your cat to perform the gymnast's routine each time they want to use the flap!

Ask a glazier for help in case you're not sure how to measure the door. They can determine if your door is suitable for cat flaps and help you decide on the size of flap to buy.

Once you've got your measurements, the next step to do is mark out the shape of the hole in the door. This will give you an outline to cutting the hole out and will stop you from making an error that will cost you money in the end!

You should also make sure that the hole you're making is in the correct place. If you're installing an apex flap to the patio door, it is vital that the hole does not be too close to hinges. This could result in leakage or issues with the seal.

If you have an opening made of glass it is best to delegate this task to a glazier. It can be difficult to insert the cat flap onto an existing glass pane, and you may be surprised to find that the process causes it to break and lose its weatherproof seal.

Measure the Cat

A cat flap lets your pet come and go whenever they want, without having to leave him alone. It also helps stop the draughts from entering your home, which isn't good for you or your cat!

If you do have a uPVC or composite door, it can seem tricky to fit a cat flap. These kinds of doors are often made from different materials than traditional wooden or uPVC doors, and the installation process is different, too. Be sure to check with the manufacturer if the door is compatible before you install the cat flap on your uPVC composite or uPVC door. Modifications can cause warranty issues.

Generally speaking, these kinds of doors are made to be tough and durable and have insulation built-in. They are more resistant to weather than other types of doors, but it can be difficult to install an animal flap. If you're not sure if your uPVC or composite door will accommodate the cat flap, make sure you consult with a professional jointer prior to beginning.

To ensure that your cat is able to access the door, you'll need take a measurement of their height. It's easiest to measure their height when they're calm or asleep, so that they don't sway around. Once you've determined their height, take a measurement of the distance between their stomachs and the floor to determine where the bottom of the cat flap step flap should go. This location can be marked on the door.

When you use power tools to cut your uPVC door or composite door, you need to be careful. Drilling into metal can cause it crack, especially when the area is made of toughened glass. This is the reason it's recommended to employ an expert glazier to install your cat flap in a pane of glass. This will stop the glass from breaking or becoming brittle. A Glazier will also be capable of providing you with a circular cat flap that is less likely to break and safer for your cat to use.

Cut the Hole

If it doesn't then you can create one yourself by using a piece of thin paper (tracing paper is the best choice). If it doesn't, create your own using fitting a cat flap in A upvc door thin piece of paper (tracing papers are ideal). Once the shape has been penciled on the door, use your spirit level and make sure it's horizontal. This will ensure that the cat flap sits properly in the opening, and it will not slide open or close.

Next, take your jigsaw and cut out the shape marked on the door. Make sure that you're using a blade suitable for use on uPVC doors. Usually, it will be marked accordingly, if not ask the staff at your DIY store for assistance. Once you have the hole drilled and the flap section is in place, put it up against it and push it out to ensure that the flap's action is smooth. If it becomes stuck at any point, you can use a file or a sandpaper to correct this.

It is also important to ensure that there are no electric cables or gas pipes inside the door fitting a cat flap in A upvc door you'll be cutting through because they could be damaged by the Jigsaw. Also, be aware of any handles or other door fixtures which will need to be removed to install the cat flap and be careful not to harm them in the process.

The majority of people who install a cat flap on their own have a standard solid uPVC front door, so they won't be faced with these problems. If your door is constructed of wood or has a decorative part that is not easily removed, it will make the task.

It is always worth seeking assistance from an expert cat flap fitter for these kind of jobs since it is essential to do the job done correctly to avoid possible issues in the future. Getting it wrong can cause the door to be damaged and could cause the warranty to be invalidated.

Install the Flap

After you've made your hole cut, put the flap on to check whether it is able to open easily. If you notice any points that catch or stick, use a hand file or sandpaper to smooth them down until they are able to fit and open without any problems. Be sure that the flap is aligned with the door.

If your kit doesn't have an example, you could make use of thin paper such as tracing or acetate. Place the paper against the door and draw an area on which you'll will need to place the flap (this will be your cutting guide). Then, using the pencil lines you've made on the door, mark four screw holes in the corners of the flap. These will be the screw points that you'll use to secure the flap into the right position.

Most uPVC doors are solid and therefore quite straightforward to cut into. However, if the door is made of GRP or a composite material, it can be more challenging. If you're not experienced with this, it might be advisable to hire a professional to do the work for you. They will also be able to tell you if your door is suitable for the installation of the cat flap.

You can install the cat flap onto composite doors. However, it's essential to consult with the manufacturer or a professional joiner prior to making any changes because any changes to these types of doors may invalidate the warranty. If you decide to do the work yourself, keep in mind that it can be messy and could be dangerous.

You'll require a saw or grinder to cut through composite doors more than only the GRP. This can be a dangerous job, and you'll have to be extra careful to avoid damaging the door. It is important to note that it's more difficult to make holes in door glass than a uPVC door or solid wood door.